ISO 9050:2026

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٤ يوليو ٢٠٢٦

Glass in building — Determination of luminous and solar characteristics of glazing

ملفات الوثيقة ISO 9050:2026

الإنجليزية 94 صفحات
الإصدار الحالي
USD 270.23

مجال الوثيقة ISO 9050:2026

This document specifies methods of determining the luminous and solar characteristics of glazing in buildings. These characteristics can serve as a basis for lighting, heating and cooling calculations of rooms and permit comparison between different types of glazing.

This document applies both to conventional glazing and to absorbing or reflecting solar-control glazing, used as vertical or horizontal glazed apertures. The appropriate formulae for single, double and triple glazing are given. A matrix method is provided as an alternative calculation method.

This document introduces a method to determine the luminous and solar properties of building-integrated photovoltaic (BIPV) glazing.

This document is accordingly applicable to all transparent materials except those which show significant transmission in the wavelength region 5 µm to 50 µm of ambient temperature radiation, such as certain plastic materials.

Materials with light-scattering properties for incident radiation are dealt with as conventional transparent materials subject to certain conditions (see 5.3).

Angular light and solar properties of glass in building are excluded from this document. However, research work in this area is summarised in References [1], [2] and [3].

Guidance on the measurement of luminous and spectral properties of glass can be found in Reference [4].

Vacuum insulating glass (VIG) is excluded from the scope of this document. For determination of the g value of VIG, refer to ISO 19916-1[5].

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 2055-1:2015
 
لائحة فنية خليجية
منتجات الحلال – الجزء 1: الاشتراطات العامة للأغذية الحلال
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 21611:2026
 
مواصفة قياسية دولية
Dentistry — Vocabulary for source conclusion for human identification by dental evidence
ISO 21815-4:2026
 
مواصفة قياسية دولية
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing and rotation motion
ISO 4576:2026
 
مواصفة قياسية دولية
Plastics — Polymer dispersions — Determination of sieve residue
ISO 8553:2026
 
مواصفة قياسية دولية
Milk — Enumeration of microorganisms — Plate-loop technique at 30 °C